Publicidad
Idiomas disponibles
Idiomas disponibles
DENTAL LED OPERATING LIGHT POLARIS
TECHNICAL DESCRIPTION
SPECIFICATIONS
Size and movement:
Light head weight:
Operating light arm weight:
Connection hub to light arm:
Power supply (without transformer):
Maximum power consumption:
Current consumption:
Fuse (with transformer):
Light pattern:
Light intensity (adjustable):
Colour Temperature (adjustable):
Focal distance:
CRI:
Light source:
Emission spectrum:
Maximum light power emitted:
Minimum required distance from patient:
30°
Up
120°
Down
Figure 1
ELECTRICAL WIRING
"POLARIS" must be electrically connected as follows
(feed voltages intended 50 W load):
Light head (Figure 2A)
GREEN WIRE
0 Volt
BLACK WIRE
17-24 Volt ~ (alternating current)
Operating light arm (Figure 2B)
GREEN WIRE
0 Volt
BLACK WIRE
17-24 Volt ~ (alternating current)
WHITE WIRE
not linked
USER'S GUIDE
14
see Figure 1
1.900 kg
5.150 kg
diameter 35 mm (other on request)
17 - 24 Vac 50-60 Hz
24 VA
1.5 A
2 x 2.5 A type F
70 x 140 mm
min. 8.000 Lux – max 35.000 Lux
from 4200 K to 6000 K
70 cm
> 85%
10 LEDs (1 W each)
400-700 nm
10 mW
70 cm
320°
320°
937,5
Minimum power of the transformer for all applica-
tions: 20 VA 50/60 Hz
Minimum power of the transformer for auxiliary pow-
er supply connector: 50 VA 50/60 Hz
It is necessary to use an insulated transformer from
the net 230 V 50/60 Hz and with output voltage from
17 to 24 Vac 6 A and, that will ensure stiffened
insulation, in the respect of safety regulations also
make sure that, during the primary winding of the
transformer, a bipolar switch would be put before in
1500
680,5
model A
685
180 180
cod.:8646****
1618
ENGLISH
Publicidad
