HPA-Faip M 624 2V FS Uso Y Mantenimiento página 29

INTRODUCTION
The purpose of this manual is to furnish the owner and operator of this SIMPESFAIP machine
with a set of practical and safe instructions for the use and maintenance of your tyre changer.
Follow all the instructions carefully and your tyre changer will assist you in your work and give
lasting and efficient service in keeping with SIMPESFAIP traditions.
The following paragraphs define the levels of danger regarding the machine associated with the
warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of serious injury or death
WARNING
Dangers or unsafe procedures that can cause serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause minor injuries or damage to property.
Read these instructions carefully before powering up the machine.
Conserve this manual and all illustrative material supplied with the machine in a folder near the
machine where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine; in the event
of sale all relative documentation must remain with the jack.
The manual is only to be considered valid for the machine of the model and with the serial
number indicated on the nameplate carried by the machine.
WARNING
Adhere to the contents of this manual: SIMPESFAIP declines all liability in the case of
actions not specifically described and authorised in this manual.
ATTENTION
This machine must be used only by qualified and authorised personnel.
A qualified operator is construed as a person who has read and understood the
manufacturer's instructions, is suitably trained, and is conversant with safety and
adjustment procedures to be adhered to during operations.
Use of the machine by inappropriate staff may involve serious risks for the operator
himself and for the end user of the product processed (rim-tyre assembly).
NOTE
Some of the illustrations in this manual have been taken from photographs of prototypes; the
standard production model may differ slightly in certain respects.
These instructions are for the attention of persons with basic mechanical skills.
We have therefore condensed the descriptions of each operation by omitting detailed
instructions regarding, for example, how to loosen or tighten the fixing devices on the machine.
Do not attempt to perform operations unless properly qualified and with suitable experience.
In case of need, please contact our nearest authorised Service Centre for assistance.
4