HPA-Faip M 624 2V FS Uso Y Mantenimiento página 35

Wheel lifting device ........................................................................ PN
Set of 4 clamps for motor cycle wheels............................................... PN
Special bead-breaker blade for motorcycle wheels................................ PN
Set of four 8" adapters....................................... ............................. PN
Set of 12 inside/outside clamp guards................................................ PN
PPT Bead presser pliers ................................................................. PN
Set of 6 plastic covers for tyre lever ...................................................PN
Set of 6 alloy rim guards for bead breaker blade ................................... PN
Plastic tools head set ..................................................................... PN
Other accessories are available upon request. For information, please consult our illustrated
catalogue.
Your tyre changer is designed exclusively for mounting and demounting tyres using the tools
with which the machine is equipped and in accordance with the instructions in this manual.
Any other operations carried out on the machine are considered improper use and shall
be construed as negligence.
The machine is equipped with an inflation system that is independent from the systems
described above. Extreme caution must be exercised during the use of the machine inflation
system (read INFLATION heading).
When working with the machine it is strongly recommended to avoid using equipment or
tools not manufactured by SIMPESFAIP.
Figure 9 shows the positions assumed by the operator during the various stages of work with
the machine.
A Bead breaker
B Tyre demounting and mounting
C Inflation area.
The tower tilting operation must be carried out from work position C (fig. 9), keeping your
hands well away from all moving parts of the machine.
To stop the machine in an emergency:
- unplug from the electrical supply;
- isolate the air supply network by disconnecting the shut-off valve (rapid insert).
OPTIONAL ACCESSORIES
SPECIFIED CONDITIONS OF USE
WARNING
WARNING
ATTENZIONE
WARNING
10
8-11100243
8-11100036
801260402
8-11100042
8-11100044
801262417
801246241
801258383
801250309