HPA-Faip M 624 2V FS Uso Y Mantenimiento página 33

The equipment is intended for professional use only.
Only one operator may work on the equipment at a time.
Failure to observe these instructions and the relative danger warnings can cause serious
injury to the operator and others. Do not power up the machine before you have read
and understood all the danger/warning/attention notices in this manual.
This machine must be used only by qualified and authorised personnel.
A qualified operator is construed as a person who has read and understood the manufacturer's
instructions, is suitably trained, and is conversant with safety and adjustment procedures to be
adhered to during operations.
Operators are expressly forbidden from using the machine under the influence of alcohol or
drugs capable of affecting physical and mental capacity.
However, in the case of drugs prescribed by a qualified physician without contraindications, the
operator may be allowed to use the machine.
The following conditions are essential:
the operator must be able to read and understand the contents of this manual;
make sure the operator has a thorough knowledge of the capabilities and characteristics of
this machine;
Keep unauthorised persons well clear of the area of operations;
make sure that the machine has been installed in compliance with established legislation and
standards;
make sure that all machine operators are suitable trained, that they are capable of using the
machine correctly and that they are adequately supervised during their work;
never leave nuts, bolts, tools or other equipment on the machine to avoid the risk that they
could become entrapped between moving parts during work.
do not touch power lines or the inside of electric motors or other electrical equipment until the
power has been disconnected and locked out;
read this manual carefully and learn how to use the machine correctly and safely;
always keep this user manual in a place where it can be readily consulted when working with
the machine and consult it whenever you are in need of confirmation or explanations.
Do not remove or deface the safety DANGER, WARNING or INSTRUCTION DECALS.
Replace any missing or illegible Danger, Warning or Instruction decals.
Missing or damaged decals can be obtained at your nearest SIMPESFAIP dealer.
When using and carrying out maintenance on the machine observe the unified industrial
accident prevention regulations for high voltage industrial equipment.
Any unauthorised alterations made to the machine automatically release the manufacturer
from any liability in the case of damage or incidents attributable to such alterations.
Specifically, tampering with or removing the machine's safety devices is a breach of the
regulations for industrial accident prevention.
SAFETY REGULATIONS
WARNING
WARNING
WARNING
8