Holmatro IPU-M Serie Manual página 31

1. The on/off switch of this pump is provided with a 50 Hz switch-off coil. If the pump is connected
to a mains supply of 220 V, 60 Hz, 3 phase, the 60 Hz switch-off coil must be installed by an
approved installer.
Example 2: IPU-M 2035 DRU
/i
Digit Example
1-5 IPU-M
6-9 2035
10 D
11=12 RU
3.2 Product identification
Refer to Fig. 2.
/i
1 Pressure relief valve
2 Quick-lock couplers
3 On/off switch
4 Hydraulic oil tank
5 Hydraulic oil tank vent
6 Hydraulic oil drain plug
7 Hydraulic oil dip stick and filler opening
8 Electric motor
3.3 Weight and dimensions
Refer to Fig. 3.
WARNING
Two persons are required to carry a pump of maximum 50 kg. Use a cart for pumps heavier
than 50 kg.
/i
Model
IPU-M 06 W 6 SD
IPU-M 06 W 6 SQ
IPU-M 12 W 6 SD
IPU-M 32 S 25 E
IPU-M 2035 DRU
IPU-M 2035 DRU M/K
IPU-M 2035 QRU
IPU-M 2035 PRU
IPU-M
Description
Industrial pump for mobile application
Model code
Effective volume of hydraulic tank = 2 l
Type of drive
D = electric motor, 230 V, 50 Hz, single phase
P = four-stroke petrol engine
RU = Rollcage unit (including protection frame)
Part number
170.152.020
170.152.010
170.152.039
170.152.503
170.152.007
170.152.015
170.152.018
170.152.034
916.219.173_005
9 Petrol engine
10 Pulling cord
11 Stop switch
12 Fuel valve
13 Engine oil dipstick and filler opening
14 Fuel tank cap
15 Choke lever
16 Speed control lever
Weight Length (C)
(kg) (mm)
45
45 462
47
72 528
27.5 405
26 405
Width (B Height (A)
(mm) (mm)
339 470
400 651
325 375
345 430
EN
31