Publicidad
Idiomas disponibles
Idiomas disponibles
Petrol engine
Item
Power
Engine type
Brand and model
Motor capacity
Engine oil volume
Type of engine oil
Fuel tank volume
Type of fuel
Type of spark plug
Start system
Noise emission according
•
Noise pressure level L
•
Source capacity L
4
Preparation for first use
4.1
General
•
Check the equipment for completeness and damage. Do not use the equipment if it is damaged; in
that case contact the Holmatro dealer.
•
Check whether all accessories are available.
•
Make sure the pump is in a horizontal position.
4.2
Check the hydraulic oil usage
CAUTION
Use hydraulic oil with the correct specifications and make sure no dirt or dust enters the
hydraulic tank to prevent damage to the pump and tools.
•
If the pump is used at temperatures above -10 °C:
1. Check the hydraulic oil level.
2. If necessary, add ISO-L HV VG 36 oil. (for VM43L: ISO-L HV VG 15 oil only)
•
If the pump is used at temperatures below -10 °C:
Replace the hydraulic oil with ISO-L HV VG 15 oil because the pump is delivered with ISO-L
HV VG 36 hydraulic oil.
4.3
Check the electric motor
•
Check whether the voltage and power rating of the electrical power is in accordance with that of the
motor (see specifications on the motor nameplate).
WARNING
A licensed electrician is required to replace an electrical power connector.
IPU-M
Unit
kW (hp)
cm
cm
l
dB(A)
pA
dB(A)
WA
916.219.173_005
3
(cc)
3
(cc)
IPU-M 2035 PRU
2.1 (2.9)
1 cylinder - 4 stroke
Robin EY09DU
86
400
10W-30
1.5
OCT. > 86 unleaded petrol
BMR4A (NGK)
Pulling cord
81
98
EN
33
Publicidad
