Holmatro IPU-M Serie Manual página 43

Object
Hydraulic couplers
Dust caps
Hydraulic hoses
Hydraulic oil
Petrol engine
1. Holmatro dealer maintenance.
8.4 Maintenance activities
8.4.1 General
• Disconnect the electric motor from its power supply before starting any maintenance.
• Check the pump for damage and leaks. If the pump does not work properly and/or leaks, have it
repaired by an Holmatro Certified Technician.
8.4.2 Hydraulic coupler
• Check the couplers for damage. Have a Holmatro Certified Technician replace damaged couplers.
• Clean the coupler with luke warm water and a mild soap solution.
• Dry the couplers.
• Quick-lock couplers:
- Lubricate the end of the coupler with hydraulic oil or inject WD-40.
- Lubricate the locking ring by injecting WD-40 into the space between the back section and the
locking ring.
- Lubricate the retainer ring by injecting WD-40 underneath the ring.
- Connect the couplers and check whether the coupler locks automatically. Check the locking by
pulling the hoses apart with a normal manual effort. The couplers must not slip.
- Disconnect the couplers by turning the retainer ring and pushing the locking ring backwards.
• Connect and disconnect the couplers a few times to improve the internal lubrication of the locking
system.
8.4.3 Dust caps
• Check the dust caps for damage. Replace damaged dust caps.
• Clean the dust caps with running water. Dry the dust cap and treat it with preservative oil.
8.4.4 Hydraulic hoses
• Clean the hose with luke warm water and a mild soap solution.
IPU-M
Action
Check, clean, lubricate
Check, clean
Check, clean
Check
Replace
Check, clean
916.219.173_005
Time interval
x
x
x
x
x x
EN
x
x
x
x
x x
x x
43