Publicidad
Idiomas disponibles
Idiomas disponibles
Parts Warranty Summary
Parts Warranty Summary
Hunter Engineering Company warrants new equipment to be free
from defects in material and workmanship under normal conditions
of use for a period of one (1) year from the date of installation .
Exceptions to this warranty are listed below .
• • All circuit boards are warranted for a period of three (3) years .
All circuit boards are warranted for a period of three (3) years .
• • PC components and options installed inside the PC are
PC components and options installed inside the PC are
warranted for a period of three (3) years .
warranted for a period of three (3) years .
• • LCD's are warranted for a period of three (3) years .
LCD's are warranted for a period of three (3) years .
• • Power supplies are warranted for a period of three (3) years .
Power supplies are warranted for a period of three (3) years .
• • Transducers are warranted for a period of three (3) years .
Transducers are warranted for a period of three (3) years .
• • Wheel Balancer motors are warranted for a period of three (3)
Wheel Balancer motors are warranted for a period of three (3)
years .
years .
• • Wheel Balancer shafts are warranted for a period of three (3)
Wheel Balancer shafts are warranted for a period of three (3)
years .
years .
• Tire Changers are fully warranted for a period of three (3) years
with the exception of consumable parts and TCR1 power units .
• • All lift and Hunter TCR1 power units are warranted for a period
All lift and Hunter TCR1 power units are warranted for a period
of two (2) years .
of two (2) years .
• • Normal wear items are not covered with the exception of
Normal wear items are not covered with the exception of
batteries, which are covered for a period of six (6) months .
batteries, which are covered for a period of six (6) months .
• • Replacement parts purchased through the Hunter Service
Replacement parts purchased through the Hunter Service
Center and no longer covered by machine warranty are
Center and no longer covered by machine warranty are
warranted for a period of six (6) months .
warranted for a period of six (6) months .
Warranted parts may be replaced with new or refurbished parts at
the discretion of Hunter Engineering Company .
This warranty does not include normal wear items and does not
apply to any product which has been subject to abuse, misuse,
alterations, accident, exposure to the elements, tampering,
unreasonable use, or failure to provide reasonable and necessary
maintenance .
All warranty claims must be made to your local Hunter Service
representation . Labor warranties can vary and additional policies
and restrictions may apply .
This is Hunter Engineering Companies' only warranty with respect to
new equipment .
See our document library at
www .hunter .com
12
The following disposal procedure shall be exclusively applied to the
machines having the crossed-out bin symbol on their data plate .
This product may contain substances that can be hazardous to the
environment and to human health if it is not disposed of properly .
The following information is therefore provided to prevent the release
of these substances and to improve the use of natural resources .
Electrical and electronic equipment should never be disposed of
in the usual municipal waste but must be separately collected for
their proper treatment . The crossed-out bin symbol, placed on the
product and on this page, reminds the user that the product must be
disposed of properly at the end of its life .
In this way it is possible to prevent that a non specific treatment of
the substances contained in these products, or their improper use,
or improper use of their parts may be hazardous to the environment
or to human health . Furthermore, this helps to recover, recycle and
reuse many of the materials contained in these products .
Electrical and electronic manufacturers and distributors set up
proper collection and treatment systems for these products for this
purpose .
At the end of the product's working life, contact your supplier for
information about disposal procedures . When you purchase this
product, your supplier will also inform you that you may return
another worn-out appliance to him free of charge, provided it is of
the same type and has provided the same functions as the product
just purchased .
for additional details .
Any disposal of the product performed in a different way from that
described above will be liable to the penalties provided for by the
national regulations in force in the country where the product is
disposed of .
Further measures for environmental protection are recommended:
recycling of the internal and external packaging of the product and
proper disposal of used batteries (only if contained in the product) .
Your help is crucial in reducing the amount of natural resources used
for manufacturing electrical and electronic equipment, minimise the
use of landfills for product disposal and improve the quality of life,
preventing potentially hazardous substances from being released in
the environment
Environmental
Environmental
Information
Information
Figure 46.
English
Publicidad
