Special Functions - Corghi EXACT 70 II Manual De Uso

Last step Returns to the previous
program step.
Skip operation Skips to the next pro-
gram step without requiring execution of the
current step.
Back to selection Moves the active
cursor from the icon bar to the working zone.
Increase Increases the value of the
selected object (for example, it increases the
rim diameter to the value above).
Decrease Decreases the value of the
selected object (for example, it decreases the
rim diameter to the value below).
Exit Ends the current operation.
Next page Displays the sequence of
pages of the on-line help function. The icon is
only active when there is more than one page.
Save Saves the vehicle's pre-adjustment
values.
Save axle weight Saves the weight of
the axle being measured.
Yes Confirms the selection made or the
value entered.
No / Abort Aborts the selection made
or the value entered.
User code For changing the user code.
Last axle In the trailer and truck proce-
dure, it returns to adjustment of the previous axle.
Skip axle In the trailer and truck proce-
dure, it moves on to adjustment of the next axle.
VAS Set-up Changes the set-up settings,
Operator's Manual EXACT 70 II
entering the defaults required by the manufac-
turer for alignment of VAS cars.
MERCEDES Set-up Changes the set-
up settings, entering the defaults required by
the manufacturer for alignment of MERCEDES
cars.
Manufacturer's Set-up Changes the set-
up settings, entering the CORGHI factory defaults.

Special functions

Calibration check Checks calibration of
the sensors fitted on the car (with 8 sensors only).
Maximum steering angle Activates
and deactivates the maximum steering angle
procedure.
2WS steering angle Recalls the steer-
ing angle procedure for vehicles with 2-wheel
steering.
4WS steering angle Recalls the steer-
ing angle procedure for vehicles with 4-wheel
steering.
Adjustment with car lifted Starts the
procedure for adjusting an axle with the car lifted.
End of adjustment with car lifted Ends
the procedure for adjusting an axle with the car
lifted, lower the vehicle.
Data transfer Automatic chassis clear-
ance data transfer from the instrument to the
wheel aligner.
Chassis input degrees Manual com-
pilation of the chassis height record with data
in degrees.
Chassis input mm Manual compilation of
the chassis height record with data in millimetres.
Mercedes Clamp Selects the procedure
with Mercedes wheel clamps, automatically skips
EN
59