Job Record; Toe Curve Adjustment; Adjusting The Engine Cradle; Free Wheel Toe Adjustment Procedure - Corghi EXACT 70 II Manual De Uso

preliminary check reports are printed.
ALPHANUMERIC PRINT (standard).
VEHICLE SITUATION GRAPHIC PRINT.
CHASSIS SITUATION GRAPHIC PRINT.

JOB RECORD

From the printing stage, access the job record
using the icon. Use of the job record
instead of selection of the vehicle from the da-
tabank can also be set in the set-up.
Another setting that can be made in the set-up
is the type of job record to be used.
Fill in the job record by using the keys as de-
scribed in the "DATABANK MANAGEMENT"
section.
The compulsory fields are highlighted.
WARNING
When a customer or vehicle is selected from
those already on file, the relative data are
loaded in the job record (e.g., when a vehicle
is selected by means of the registration num-
ber, the customer and the vehicle saved in
the vehicle record are automatically loaded).
These data overwrite those entered previously,
so the selected vehicle may be modified in the
databank.
When a new value is entered in the REG.N.,
CHASSIS and CUSTOMER fields, a new record
is automatically opened for data input.
When the job done is saved, the vehicle and
customer records are also automatically updated.
76
TOE CURVE
ADJUSTMENT
This procedure is used to check the variation
in the toe when the vehicle's wheel alignment
is modified.
Locate the front axle adjustment screen and select
the pop-up menu above the
icon (press the up arrow to open the menu). Click
on the "Toe Curve" icon.
Follow the procedure.
ADJUSTING THE
ENGINE CRADLE
Procedure used for adjusting the position of the
engine cradle, useful for obtaining even front cam-
ber distribution by adjusting the cradle position.
Locate the front axle adjustment screen and se-
lect the pop-up menu above the
axle" icon (press the up arrow to open the menu).
Click on the
Follow the procedure.
FREE WHEEL TOE
ADJUSTMENT
PROCEDURE
On some vehicles, access to the toe adjustment
registers is difficult. This procedure allows the
front toe values to be adjusted with the wheels
locked to an angle, with no need to remove
and replace the steering wheel holder. Locate
the front axle adjustment screen and select the
pop-up menu above the
(press the up arrow to open the menu). Click on
the "Free Wheel Toe" icon.
Follow the procedure.
Operator's Manual EXACT 70 II
"front axle"
"Cradle Adjustment" icon.
"front axle" icon
"front