Publicidad
Idiomas disponibles
Idiomas disponibles
4 - Fit a new gasket (R), screw the drain
plug (Q) and tighten to a torque of Nm 54.
5 - Pour the new oil until it reaches the
GB
correct level on the dipstick (see "Engine
oil level check" on page 54 and "Technical
data" on page 15 for the correct oil quantity).
6 - Screw in the filler plug (M).
7 - Start the engine and bring it to the
operating temperature of 70°C - 80°C
(158°F - 176°F) for approx. five minutes.
Check for any oil leaks.
8 - Turn off the engine and check the oil
level (see "Engine oil level check" on page
54).
English
IMPORTANT
If necessary, contact the manufacturer
of the vehicle in which the engine is
installed or a workshop authorised by
VM MOTORI STELLANTIS EUROPE.
IMPORTANT
Do not dump any polluting material
in the environment. Carry out their
disposal in compliance with the
relevant legislation in force.
56
R756EU6EH
42432108F
Publicidad
