Publicidad
Idiomas disponibles
Idiomas disponibles
- For belt with automatic tensioner
proceed as follows:
IMPORTANT
Carry out the operation with the engine
off. Ignition key removed, wait at least
6 minutes before disconnecting the
negative battery cable.
1 - Let the engine cool down adequately
to avoid the risk of burning.
2 - Turn the automatic tensioner (A)
counter-clockwise to loosen the belt (B)
and remove it from the pulley (C).
3 - Remove the belt (B) and replace it
fig.2.
Fig. 2
Belt Tensioner (A)
English
The fig.2 shows an example of belt-rotation
configuration R756EU6EH.
Tensioner Pulley (C)
65
IMPORTANT
Before tightening the belt, make sure
that it is correctly positioned in the
pulley seats.
CAUTION - PRECAUTION
Before restarting the engine, make sure
there are no tools or other material near
the moving parts.
IMPORTANT
Do not dump any replaced part in the
environment. Carry out their disposal in
compliance with the relevant legislation
in force.
Drive Belt (B)
Drive Belt (B)
R756EU6EH
Drive Belt (B)
42432108F
GB
Publicidad
