Publicidad
Idiomas disponibles
Idiomas disponibles
AIR BLEEDING FROM THE FUEL SUPPLY CIRCUIT
IMPORTANT
This operation must be carried out after
each fuel filter cartridge replacement.
Follow the procedure below :
IMPORTANT
Carry out the operation with the engine
off. Ignition key removed, wait at least
6 minutes before disconnecting the
negative battery cable.
1 - Carry out the operation with the engine
cold.
2 - Do not come into contact with hot
engine parts and fuel. Wear gloves and
protective clothing suitables.
3 - Prepare a container with appropriate
capacity under the fuel filter.
4 - Partially loosen the screw (E) to allow
the fuel to be bled to drain.
5 - Manually activate the pump (F) until the
fuel drained has no air bubbles.
6 - Tighten the screw (E).
IMPORTANT
Thoroughly dry any fuel residues befo-
re starting the engine.
English
E
CAUTION - PRECAUTION
Do not use the starter motor to try to
bleed air from the fuel circuit.
CAUTION - PRECAUTION
Do not loosen high-pressure pipe
unions of the supply circuit (common
rail system).
61
R756EU6EH
GB
F
42432108F
Publicidad
