Publicidad
Idiomas disponibles
Idiomas disponibles
ENGINE PROTECTION IN CASE OF LONG PERIODS OF INACTIVITY
It is recommended to contact the
personnel authorised by VM MOTORI
GB
STELLANTIS EUROPE to carry out the
operations described below:
- Protection against external corrosion.
- Protection against internal corrosion.
- Engine packaging and storage.
PROTECTION AGAINST EXTERNAL CORROSION
IMPORTANT
The operations for protecting against
external corrosion must be carried out
with the engine off and cold.
- UNPAINTED SURFACES
Unpainted metal components and surfaces
(e.g. engine flywheel) must be protected
with "FL MECA FLUID / P118V" corrosion
protection oil.
- RUBBER COMPONENTS
Unpainted sleeves and pipes must be
protected with talcum powder. Check the
tightening of the relevant fixing clips in
advance.
- Protect the surfaces of the metal pulleys
with "FL MECA FLUID / P118V" spray.
English
- ENGINE OPENINGS
Seal all the engine openings, including the
exhaust. Use cardboard, plywood or metal
covers, making sure they do not leave
behind any fragments of material.
All the engine openings - e.g. air intake
ducts or turbocharger air inlet - must be
protected with suitable covers capable of
preventing solid, liquid materials or dusts
from entering and delaying the evaporation
of the volatile substances of corrosion
protection agents. Apply plugs to the fuel
inlet and outlet pipes of the injection system.
- BATTERY CONNECTED TO THE
ENGINE
Respect the instructions of the manufacturer
of the vehicle in which the engine is
installed.
24
R756EU6EH
42432108F
Publicidad
