Wiesenfield WIE-PM-1200A Manual De Instrucciones página 112

• When reinstalling the air filter with the dust collector, be sure to seat well the collector.
• Install the air guide in the correct order.
Single core type
1. Unscrew the wing nut and air filter housing, remove the filter element.
2. Clean with household detergents (or cleaning solvents with high flash point) and warm water, then dry.
3. Soak in clean engine oil until saturated; squeeze out excess oil. Otherwise, the engine will produce smoke during start-up.
4. Install the filter element and air filter housing.
Oil bath:
1. Remove the air filter nut and housing, remove the filter element.
2. Clean with household detergents (high flash point) and warm water, then dry.
3. Soak in clean engine oil until saturated. Squeeze out any excess oil. Otherwise, the engine will produce smoke when starting.
4. Remove oil from the air filter housing. Remove dust from the inside with non-flammable cleaning substances or solvents with high flash point and then
dry.
5. Fill the air filter housing with the appropriate engine oil to the standard oil level mark.
6. Reinstall the air filter.
EN
A - air filter housing
B - foam