Working With The Engine - Wiesenfield WIE-PM-1200A Manual De Instrucciones

EN
D - engine switch
E - motor with electric start
F - starter rope
CAUTION: Sudden release of the handle may cause an impact on the motor. Release the handle, slowly adjusting to the kickback force.
b) Electric starter:
Set the engine switch to the "START" position and leave it there until the engine starts. After starting the engine, leave the engine switch in the "ON"
position.
NOTE: Use the engine switch for no more than 5 minutes each time to avoid damaging the engine. Try again 10 minutes after the last attempt.
G - motor switch (motor with electric start)

WORKING WITH THE ENGINE

1. Warm up the engine and move the choke lever to the "OPEN" position.