Instant Pot PRO PLUS Serie Manual De Usuario página 46

Care, cleaning and storage
Steam release assembly
Remove the steam release assembly
Remove the steam release cover, then
pull the steam release valve up and off
the steam release pipe.
Install the steam release assembly
Place the steam release valve on the
steam release pipe and press down firmly.
The steam release valve sits loosely
on the steam release pipe but should
remain in place when the lid is turned
over.
Place the steam release cover over the
steam release valve and press down. The
cover is pressure-fit in place.
46 | instantbrands.co.uk | +44 (0) 3331 230051
Anti-block shield
Remove the anti-block shield
Grip the lid like a steering wheel and use
your thumbs to press firmly against the
side of the anti-block shield (pressing
towards the side of the lid and up) until it
pops off the prongs underneath.
Install the anti-block shield
Place anti-block shield over prongs and
press down until it snaps into position.