EN
12.4 Electrical connection
Notes for the electrician
The appliance is designed for connection to three-phase
•
and alternating current 380- 415 V 3 N~50 Hz
The rated voltage of the heating elements is 230 V. The
•
appliance can be adapted to the single-phase current
230V by means of appropriate bridging on the terminal
strip.
An appropriately designed cable type must be selected as the
mains power cable, taking into account the type of connection
and rated power of the cooker.
The connection cable is fixed in the cable clamp.
ATTENTION
Connect the earthing conductor to the
terminal of the terminal strip marked with
.
Description of rear of oven
1)
Cable connector for hob compact plug
2)
(Grey) mains power socket
3)
Screws
Earthing conductor
Earthing conductor not included in the compact plug. Fix the
earthing conductor to one of the screws (3).
Mains power socket
open/close
•
To unlock, insert a screwdriver (a) and move it slightly
downwards (b).
•
To close, fold the cover and snap in with light pressure.
Page | 50
Figure 8 Rear of the oven
Neutral conductor symbol
Figure 9 Mains power socket