Swing-N-Slide Brentwood PB 8241W Manual De Instrucciones página 17

NOTE: There must be a 1/2''
Nominal Gap between all
deck boards.
B. Install Deck Boards
1. Install (10) 1'' x 4'' deck boards to structure as shown (Fig. 8).
2. Use two 2-1/2'' screws at center and each end of deck boards.
Note: Screws at center will attach to center support.
Brentwood Assembly Instructions
(2)
2-1/2''
screws
per joint
2-1/2'' screw
17
Fig. 8