Husqvarna BMR 25P Manual Del Usuario página 13

Separator
The separator keeps the abrasive material
contamination free. The separator holds the abrasive
material and supplies the blast wheel with abrasive
material.
The separator tray keeps contamination away from the
abrasive material and the blast wheel.
To fill the product with abrasive
material
WARNING:
protective equipment during operation. Refer
Personal protective equipment on page 7 .
to
1. Make sure that the product fully stops. Refer to
stop the product on page 16 .
2272 - 001 - 14.05.2024
Always use personal
To
2. Open the clamp (A) on each side of the separator
and remove the separator cover.
3. Open the 2 clamps (B) and pull out the separator
tray (C).
4. Remove all contaminations from the separator tray
when you fill abrasive material or when it is
necessary.
5. Fill the separator with abrasive material to the height
of the separator tray. Fill abrasive material when it is
necessary.
Pressure tank manometer
The pressure tank manometer shows the pressure in the
pressure tank. The air in the pressure tank cleans the
primary filters. The pressure is approximately 7 bar/100
PSI during operation.
A
B
C
13