Husqvarna BMR 25P Manual Del Usuario página 2

Introduction..................................................................... 2
Safety..............................................................................5
Product damage............................................................. 5
Operation...................................................................... 11
Maintenance................................................................. 18
Owner responsibility
WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability
to breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders
wear appropriate respiratory protection such
as dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions use an
appropriate dust collector.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.
2
Contents
Introduction
Processing of concrete and
Troubleshooting............................................................ 27
Transportation, storage and disposal........................... 29
Technical data.............................................................. 31
Accessories.................................................................. 33
CALIFORNIA AIR RESOURCES
BOARD (CARB)
Note:
This machine is considered a preempt Off-Road
Application as relating to CARB standards. The U.S
EPA has sole authority to establish emission standards
for preempt construction equipment.
California Proposition 65
WARNING!
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
Product description
The product is a ride-on shot blaster operated by a
propane engine. The product has an integrated dust
collector.
Intended use
WARNING:
sources, hot particles, liquids, explosive
material or pyrophoric particles and particles
that are not stable.
The product is used in commercial operations by
professional operators.
The product is used to remove layers of paint, sealants
and contaminations. The product can be used on dry,
frost-free horizontal surfaces. For example concrete,
asphalt, stone and steel.
The integrated dust collector is used for dry suction of
dust and particles from material removed by the shot
blaster. The material can be dangerous and harmful to
health.
Do not collect ignition
2272 - 001 - 14.05.2024