Publicidad
Idiomas disponibles
Idiomas disponibles
1. Make sure that the ON/OFF key is put to the OFF
position.
2. Make sure that the battery voltage is more than 11
volts.
3. Turn the ON/OFF key from the ON position to the
OFF position 2 times continuously.
Note:
Make sure to turn the ON/OFF key
continuously with less than 2.5 seconds between
each turn.
Error codes and descriptions
Error code number
0117
0122
0131
0337
0351
0352
61
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
CAUTION:
behind a vehicle.
•
Remove the abrasive material before transportation.
2272 - 001 - 14.05.2024
Cause
The coolant/oil temperature sensor circuit
has a shorted connection, faulty sensor or
shorted wire.
The throttle position sensor (TPS) has an
open connection, broken wire or faulty
sensor.
The oxygen sensor has an open connec-
tion, broken wire or faulty sensor.
The crankshaft position sensor has no sig-
nal due to air gap incorrect, loose sensor,
open or shorted connection or faulty sen-
sor.
The cylinder 1 Ignition coil Malfunction
due to broken wire in harness (may not
be visible), shorted connection or faulty
sensor.
The cylinder 2 ignition coil malfunction
due to broken wire in harness (may not
be visible), shorted connection or faulty
sensor.
End of code transmission.
Transportation, storage and disposal
Be careful during
Do not tow the product
4. Turn the ON/OFF key to the ON position again. Let
the ON/OFF key stay in the ON position.
5. Write down the error codes while they shows.
Note:
When the error code sequence is complete
the digits 6 and 1 (61) flashes
Note:
If the error code 61 shows immediately, that
means that there are no other error codes.
Solution
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
Consult the service manual of the engine
and speak to Husqvarna servicing dealer.
•
Put some type of protection on the product
during transportation. The protection keeps natural
elements for example rain and snow away from the
product.
•
Make sure that there is no pressure in the pressure
tank before transportation.
29
Publicidad
