Descargar Imprimir esta página

Husqvarna BMR 25P Manual Del Usuario página 31

Publicidad

Idiomas disponibles

Idiomas disponibles

Keep the product in a locked area to prevent access
for children or persons that are not approved.
Remove the abrasive material from the separator
before storage.
Put the product in an indoor storage away from
outdoor elements.
Put the product in a dry and frost-free area where
the temperature is not too high.
Disposal of the product
Obey the local recycling requirements and applicable
regulations.
Dimensions
Lenght, mm/in.
Widht, mm/in.
Height, mm/in.
Weight, kg/lb
Working width, mm/in.
Engine
2
Type
Power, hp@rpm / kW@rpm
Nominal engine output, kW
3
Displacement, cm
Max. engine speed (without load) , rpm
Max. engine speed (under load), rpm
Fuel type
Drive speed, m/min / ft./min
Engine oil capacity, l/gal
Spark plug gap, mm/in.
Grease for the bearings of the shot blaster head
Battery
Battery type
2
For further information and questions about this specific engine, refer to the engine manual or the web site of
the engine manufacturer.
3
As specified by engine manufacturer. Gross power rating as per SAE J1940/J1995, at specified rpm.
2272 - 001 - 14.05.2024
Technical data
3
Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
Do not discard the battery as domestic waste.
When the product is no longer in use, send it to
a Husqvarna dealer or discard it at a recycling
location.
Vapor withdraw propane or vapor on-
LGWA 2/0.4, high load, extreme
pressure, wide temperature, bearing
BMR 25P
2844.8/112
1066.8/42
1625.6/64
1474.18/3250
254/10
Kohler
25 hp
45.6
3700
3500
ly
97.5/320
1.7-1.9/0.42-0.50
0.762/0.03
grease
12v AGM 50AH
31

Publicidad

loading

Este manual también es adecuado para:

970 69 34-01