Husqvarna BMR 25P Manual Del Usuario página 32

Operating conditions, maximum gradeability
Operating temperature, °C/°F
Relative humidity max, %
Vibration level in the seat, m/s
Hydraulic system
Working pressure, bar/psi
Hydraulic tank capacity, l/gal
Hydraulic oil type
Note:
If your product requires an electrical
specification that is not in the table, speak to a
Husqvarna service agent for more information.
Approved abrasive material
Approved abrasive material
in./mm
*special operations
Noise emissions
Sound power level, LWA dB (A)
Sound pressure level at the operator's ear, LP dB (A)
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
4
Sound power level determined according to EN ISO 3747. Measured on concrete surface. Uncertainty Kwa
2.5 dB
5
Sound pressure level determined according to EN ISO 11202. Measured on concrete surface. Uncertainty
Kpa 2.5 dB
32
2 2
/ ft/s
S-390
0.05/1.2
4
High carbon steel shot
S-460
0.06/1.4
5
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
BMR 25P
23-104/-5–+40
95
0.3/0.914
130/1885.5
34.8/9.2
Mobil ATF D/M
S-550*
0.07/1.7
BMR 25P
100.4
85
2272 - 001 - 14.05.2024