Power Unit; Cooling System; Checking The Cooling Water Discharge; Checking The Engine Oil Level - Yamaha F115A Manual De Servicio

INSP
ADJ
a
b
1
COOLING SYSTEM/POWER UNIT
3200
3210
3
3220
3230

COOLING SYSTEM

CHECKING THE COOLING WATER
DISCHARGE
Check:
• Cooling water discharge
No discharge → Clean and check the
cooling water passage.
Checking steps
(1) Place the lower unit in water.
(2) Start the engine.
(3) Check that water flows from the cool-
ing water outlet.

POWER UNIT

CHECKING THE ENGINE OIL LEVEL

Check:
• Engine oil level
Above a → Check for fuel in the
engine oil.
Below b → Add engine oil so that the
level is between a and b.
REPLACING THE ENGINE OIL/OIL
FILTER
1. Remove:
• Oil filler cap 1
• Drain plug 2
2. Remove:
• Oil filter 3
Oil filter wrench
YU-38411 / 90890-01426
3. Install:
• Drain plug 2
Drain plug
28 Nm (2.8 m • kgf, 20 ft • lb)
2
3-11
E
3
3
3
3
3