Problem - Cause - Solution - FrancisFrancis Illy Y5 MILK IPERESPRESSO Manual De Instrucciones

PROBLEM - CAUSE - SOLUTION

PROBLEM CAUSE
Power cord not connected to a power
socket.
The machine does not
Power button switched to "0".
switch on.
Machine in power save status.
No water in the tank.
Capsule not inserted in the capsule
compartment.
The capsule inserted does not brew
coff ee.
The machine does not brew
Incomplete closure of the moving part of
coff ee. the machine head.
or button not activated.
Water tank not engaged correctly.
Limescale on internal components.
Failure to start the pump.
Wrong capsule type.
The water tank is not correctly and/or
Water leak.
not completely inserted.
The milk kit is not correctly and/or not
completely inserted.
SOLUTION
Connect the plug to a socket conforming to the technical data indicated in the data plate under the base of the machine.
Switch the power button to "I".
Turn on the machine by touching the or
Touch the or button again to start brewing.
Fill the tank with water.
Insert a capsule into the capsule compartment.
Remove the capsule by disengaging and lifting the lever and retrieve it from the used capsule tray. Close the capsule
compartment and dispense a small quantity of water. Refi t the capsule and start brewing.
Lift the lever and insert the capsule properly. Lower the moving part and lock it by lowering the lever. Press
to brew coff ee.
Touch the or button again.
Make sure the tank is fully inserted.
Descale the machine as described in the relevant section.
Try to dispense water with no capsule in the compartment.
Make sure that you have used an "Iperespresso" capsule for domestic use, identifi ed by the wording "Single-dose ground
coff ee capsules for domestic use" on the packaging.
Make sure that the water tank is completely inserted.
Make sure that all the milk kit components have been correctly assembled and inserted.
button.
IT
EN
Persistence of the
problem
Contact an
authorised
or
service centre.
37