1. General information
Technical documentation contains important information for safe operation and for retaining
functional safety of the lift.
To verify lift set up, the set up protocol form is to be signed and sent to the manufacturer.
Forms are available in this inspection book for use in verifying single, regular and
extraordinary safety checks. Use the forms to document inspections and leave the
completed forms in the inspection book.
The lift master forms must record changes to the construction or changes to set up location.
1.1 Set up and test the lift
Safety relevant work on the lift and safety inspections may only be done by personnel specifically
trained to carry it out. They are designated in general and in this documentation as technical
experts and specialists.
Technical experts are people (freelance expert engineers, TÜV specialists) that may inspect
and assess due to their education and experience with lift systems. They are knowledgeable in
the appropriate work safety and accident prevention regulations.
Specialists (competent people) are people who have sufficient knowledge and experience with
lift systems and have participated in a special factory training by the manufacturer (customer
service assemblers and contract negotiators are specialists).
1.2 Hazard information
To become aware of the hazardous points and important information, the following three
symbols are used with the descriptive meaning. Pay particular attention to text positions that are
labelled by these symbols.
Danger! Identifies a danger to life and limb, if the highlighted process is not done
properly there is a mortal danger!
Caution! Identifies a warning of possible lift damage or other operating company
property damage if the highlighted process is not done properly!
Note! Labels information about a key function or points to an important remark!
Opera ting Ma nua l a nd Inspection Book
POWER LIFT HL 2.60 SST DG
- 8 -