7.3.1 Cockpit app navigation menu
Product
MyModes
2. Training mode
Settings
Status
4. User defined
General
Manage components
Imprint/Info
7.4 Managing components
Connections with up to four different components can be stored in the app. However, a compon
ent can only be connected to one device at a time.
The following points need to be observed before establishing the connection:
INFORMATION
If establishing a connection to a component is not possible, perform the following steps:
►
Delete the component from the Cockpit app if applicable (see the section "Deleting a com
ponent").
►
If present, delete the component from the Bluetooth settings on the device (unpair).
►
Rest the component by connecting and disconnecting the battery charger.
Add the component again in the Cockpit app (see the section "Adding a component").
►
•
Bluetooth of the component must be switched on (see Page 84).
•
Bluetooth on the mobile device must be switched on.
•
The device must not be in "flight mode" (offline mode), otherwise all wireless connections are
turned off.
The device must be connected to the internet.
•
•
The serial number and Bluetooth PIN of the component being connected must be known.
They are found on the enclosed Bluetooth PIN card. The serial number begins with the letters
"SN".
INFORMATION
If the Bluetooth PIN card with the Bluetooth PIN and serial number of the component is lost,
contact your O&P professional.
7.4.1 Adding component
1) Tap the symbol in the main menu.
→ The navigation menu opens.
74
Tap the
Additional settings for the connected component can be con
figured in this menu.
Product
change
Name of the connected component
MyModes
Return to the main menu to switch MyModes
Settings
Change settings of the currently selected mode (see Page 80)
Status
Query status of the connected component (see Page 84)
Manage components
Add or delete components (see Page 74)
Imprint/Info
Display information/legal notice for the Cockpit app and the
connected component
symbol in the menus to display the navigation menu.