Ottobock C-Brace 17KO1 Serie Instrucciones De Uso página 95

Symbols Beep
on the signal
control
panel
4 x short
at inter­
vals of
approx.
65 sec.
(continu­
ously)
—
—
— 1 x long
— —
Vibra­ Event
tion
signal
— Charging the battery outside
the allowable temperature
range
— Maintenance required:
E.g. maintenance date
exceeded or defective vibra­
tion motor
— Bluetooth activated
— Battery charger is connected
3 x Charging mode started
short (3 sec. after connecting bat­
tery charger)
Required action
Check whether the specified
ambient conditions for charging
the battery were met (see
Page 89).
1. Use the Cockpit app to check
whether the total steps for a
maintenance
already been reached (see
Page 84).
2. Contact the O&P professional
to check whether the period
for maintenance has already
elapsed. See
"Maintenance" (see Page 87)
for the time period and total
steps.
3. Check whether a vibration
signal is emitted after con­
necting the battery charger.
4. Conduct the self-test again by
connecting/disconnecting the
battery charger.
If the symbol lights up
again and the maintenance
due date has not yet been
reached or exceeded, visit
your O&P professional soon.
If necessary, the O&P profes­
sional will forward the com­
ponent to an
Ottobock Service Center.
The product can be used
without restrictions. However,
vibration signals may not be
generated.
interval have
the section
authorised
95