Buttons In The Configuration Wizard - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
A
B
Figure 6: Home page of the configuration wizard (example)
Position Designation
A Automatic configuration
B Manual configuration
4.8.2

Buttons in the Configuration Wizard

To use the configuration wizard you must be logged in as an Installer.
User Manual
Explanation
The automatic configuration wizard guides you through the configuration
of the entire PV diesel hybrid system. During initial commissioning of the PV
diesel hybrid system the automatic configuration wizard must be run com-
pletely. In the Manual configuration area the completion status for each
subsystem is displayed in %. Once the completion status has reached
100% for all subsystems, automatic configuration is completed.
After initial commissioning, use the manual configuration wizard to carry
out settings on individual subsystems:
• Utility grid (see Section 7.1, page 44)
• Gensets (see Section 7.2.5, page 49)
• PV power plant (see Section 7.3, page 50)
• Storage system (see Section 7.4, page 53)
• Measurement devices (see Section 7.5, page 55)
• Temperature and irradiation sensors (see Section 7.6, page 62)
• Digital inputs and outputs (see Section 7.7, page 63)
• Analog inputs (see Section 7.8, page 65)
In addition, the manual configuration wizard provides an overview of the
current system settings.
4 User Interface
FSC20-BA-xx-20 19