Viewing Data Records Via The Pv Diesel Hybrid System - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

SMA Solar Technology AG
Display value Description
Energy delivered Energy generation
Digital Input #1 Status of the digital input 1 on the
Data Acquisition Module
Digital Input #2 Status of the digital input 2 on the
Data Acquisition Module
List of measured de- List containing all the devices in
vices the PV diesel hybrid system to
which the currently displayed
measurement device is assigned.
Procedure:
1. To do this you must be logged in as Installer: Select the menu Plant Overview via the page and menu
selection.
2. Select Stations > Measurements via the page and menu selection.
☑ The designations of all the measurement systems are displayed in the page and menu selection.
3. Select Internal Measurement or DAQ from the page and menu selection.
4. Select the [Show] button in the List of measured device bar.
5. In the Selected measurement points menu, select the desired measurement system and select the [Close]
button.
6.6

Viewing Data Records via the PV Diesel Hybrid System

On the Historical Data page, the SMA Fuel Save Controller depicts a selection of power values over time. Different
analysis periods can be selected here:
• the last minute
• the last 5 minutes
• the last hour
• the last 24 hours
User Manual
Value Explanation
– –
OPEN The digital input is switched off
(contact is open).
CLOSED The digital input is switched on
(contact is closed).
OPEN The digital input is switched off
(contact is open).
CLOSED The digital input is switched on
(contact is closed).
–
6 System Monitoring
–
FSC20-BA-xx-20 35