Saving System Settings; Loading System Settings - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

7 System Settings
7.9.2

Saving System Settings

Figure 27: Saving system settings
The system settings of the Fuel Save Controller are saved in parameter files. You can overwrite the current parameter
file or create a new parameter file.
The system settings of the Fuel Save Controller can only be saved, loaded or deleted when the Fuel Save Controller is
in STANDBY or ERROR mode.
Requirement:
☐ You must be logged in as Installer.
Maximum number of parameter files
It is possible to save up to ten different system settings in parameter files.
• Once this number has been reached, delete parameter files you no longer need (see Section 7.9.4,
page 69).
Procedure:
1. Choose the menu Parameter Files via the page and menu selection.
2. To overwrite the current parameter file, select the [Overwrite] button in the Current file bar.
3. To create a new parameter file, perform the following steps:
• Enter the desired file name in the New file bar and press Enter.
By pressing Enter, the entered value is adopted in the user interface of the Fuel Save Controller.
• Select the [Save] button.
7.9.3

Loading System Settings

Figure 28: Loading or deleting system settings
The system settings of the Fuel Save Controller can only be saved, loaded or deleted when the Fuel Save Controller is
in STANDBY or ERROR mode.
Requirements:
☐ You must be logged into the user interface as Installer.
☐ The SMA Fuel Save Controller and PV power plant must have been stopped (see Section 10.1, page 99).
68 FSC20-BA-xx-20
SMA Solar Technology AG
User Manual