Changing Passwords; Setting The User Interface Language - SMA FUEL SAVE CONTROLLER 2.0 Instrucciones De Uso

5 Getting Started
• To resume the login, answer the question Would you like to send a force log in request? with Yes. This
notifies users that are already logged in of your request. You will then receive a message regarding the
success or failure of your request.
Log out
A maximum of 5 Usersand 1 Installer can be logged into the user interface of the Fuel Save Controller
simultaneously. Users are not automatically logged out by closing the web browser. Therefore we recommend always
logging out of the user interface prior to closing the web browser.
If a user has not shown any activity on the user interface for more than 30 minutes, this user will be warned that he is
about to be logged out automatically. If this warning is not acknowledged within 10 seconds, the user is automatically
logged out.
Procedure:
• Click the logout link in the header.
5.2

Changing Passwords

Figure 7: Dialog box Change Password
Requirements:
☐ To change the password for the user group User, you must be logged in as User.
☐ To change the password for the user group Installer, you must be logged in as Installer.
Procedure:
1. Open the Plant Overview menu via the page and menu selection.
2. Open the Change password menu via the page and menu selection. To do this, select the down arrow button
on the scroll bar next to the page and menu selection.
3. Enter the current password in the entry field Current Password: and press the enter key.
4. Enter the new password in the entry field New Password: and press the enter key.
5. Enter the current password in the entry field Please repeat new Password: and press the enter key.
6. Select the [Apply] button.
5.3

Setting the User Interface Language

1. Open the Plant Overview menu via the page and menu selection.
2. Open the General Settings menu via the page and menu selection.
22 FSC20-BA-xx-20
SMA Solar Technology AG
User Manual