Amann Girrbach ceramill therm s Manual Del Usuario página 53

▷ In the Programme Manager, tap on
Netzwerk (Setup > Network)
Netzwerkeinstellungen (Network settings)
The
window opens.
Fig. 4 Setup > Network
▷ Tap on the
DHCP aktiv (DHCP active)
When the DHCP function is active, the button is
highlighted in colour. When the DHCP function
is active, the network server assigns the furnace
an IP address.
▷ Tap on
OK
.
The message and the
(Network settings)
window are closed.
Setup >
.
button.
Netzwerkeinstellungen
I N S T A L L A T I O N
▷ Switch the furnace via the mains switch off and
then on again.
This causes the control system to take over the
changed network settings, and the furnace
automatically seeks an IP address in the Ether-
net network.
▷ In the Programme Manager, tap on
work
.
Netzwerkeinstellungen (Network settings)
The
window opens.
▷ Note down the current IP address.
E N
Setup > Net-
53