General Code - Amann Girrbach ceramill therm s Manual Del Usuario

To change an IP address:
The current IP address cannot be edited.
▷ Tap on the respective address.
The alphanumerical keyboard window is dis-
played.
▷ In the keyboard window, tap on
▷ Enter the address and confirm with
9.1.2

General code

This function allows you to protect (lock) firing
programmes against being changed.
_ With the general code, only the programmes on
Local
the memory of the furnace control system
can be protected.
_ With the general code, all programmes in a set
are protected or released. A different marking
of individual programmes is not possible.
_ Protected programmes can not be edited and
changed. The programme editor cannot be
called up for these programmes.
_ Protected programmes cannot be deleted (Pro-
gramme Manager).
_ The functionality in the
limited.
Sets protected by the general code are marked
with a lock in the button in the Programme Man-
ager. In the programme indication, a lock in the
information bar indicates a protected programme.
Edit
.
Enter .
Setup
menu is heavily
There are two different levels of protection:
_ Protected programmes
Protected programmes cannot be changed or
deleted. They are marked by the "
_ Fixed programmes
The firing parameters of fixed programmes can
be adapted for a one-time execution, but not
saved/stored. After executing such a pro-
gramme, the Programme Manager is automati-
cally displayed. Fixed programmes are marked
"
Fix".
To activate the general code:
▷ In the
Setup
menu, tap on the
ton.
The alphanumerical keyboard window is dis-
played.
▷ Enter a password for the general code.
The General code window is displayed.
Fig. 16 General code window (example)
To protect the programmes in a set:
▷ Tap on the respective set.
The symbol in the button indicates that all
programmes in this set are protected.
S E T U P M E N U
" symbol.
General code
but-
E N
73