10.6 Access Rights; Cleaning And Maintenance; Cleaning - Amann Girrbach ceramill therm s Manual Del Usuario

C L E A N I N G A N D M A I N T E N A N C E

10.6 Access rights

Three levels are defined for accessing the fur-
E N
naces' user interface. The access levels 1 and 2 are
password-protected. The passwords are defined
Service
in the
words)
function.
The access rights should be assigned to the oper-
ators of the furnace according to their knowledge,
experience and responsibility.
By default, the furnace starts in the
(Operation)
higher (level 0).
Access level
General code
(level 0)
Operation (level
1)
Service (level 2)
Tab. 5
80
Passwörter (Pass-
menu via the
menu, with General code
Description
Limited access to the
menu.
Blocked programmes can be
selected and started.
Programmes not blocked can
be edited and created.
Resetting the general code
All programmes can be
selected and started.
All programmes can be edited
and created.
Access to the Setup
Service
Access to the
11
Possible damage when using non-original spare
parts.
Malfunctions may occur when using non-original
parts. Under certain circumstances, this can
result in serious injury or substantial property
damage.
▷ Use only original spare parts.
Bedienung
one level
Improper repairs.
▷ Have technical interventions carried out only
Setup
through authorised specialised personnel.
11.1
Risk of electric shock!
▷ Prior to any cleaning, pull the mains plug.
Possible damage to the furnace!
▷ Do not us a high-pressure cleaner or com-
menu.
pressed air for the cleaning!
menu.
▷ Use only commercially available, water-based
or non-flammable, solvent-free cleaning
agents for the cleaning.
Prior to cleaning:
▷ Allow the furnace to cool down to the room tem-
perature.

Cleaning and Maintenance

WARNING:
WARNING:

Cleaning

DANGER:
NOTE: