Storage; Malfunctions, Repairs And Warranty; Malfunctions; 13.2 Repairs - Amann Girrbach ceramill therm s Manual Del Usuario

S T O R A G E
12

Storage

▷ Switch furnace off and allow it to cool down to
E N
room temperature.
NOTE:
Several hours are required for the furnace to
cool down.
▷ Switch the furnace on again.
▷ Move insulation table up in order to shut the fir-
ing chamber.
▷ Switch the furnace off.
▷ Pull mains plug of power supply from the mains
socket outlet.
The furnace may only be stored in the
original packaging. In this, the packaging
symbols must be observed and the stor-
age conditions must be met in accordance
with Chapter 15.
84
13 Malfunctions, Repairs and

Warranty

13.1

Malfunctions

▷ In case of malfunctions, contact the manufac-
turer's Technical Service.

13.2 Repairs

Repairs may be carried out only by trained, spe-
cialised personnel.
13.3 Warranty
The warranty complies with the statutory provi-
sions. For more information, please refer to our
General Terms of Business.
Each furnace is subject to a factory test
run on behalf of the manufacturer. The
test run may cause discolouration to the
furnace compartment or sheet-metal
parts.
14

Environmental Protection

Packaging
In terms of packaging, Amann Girrbach partici-
pates in country-specific recycling systems, which
ensure optimal recycling.
All packaging materials used are environmentally-
friendly and recyclable.
Waste equipment
Waste equipment contain materials that should be
sorted for environmental-friendly recycling.
▷ After the service life has elapsed, dispose of the
machine via the public disposal systems in an
environmentally-friendly manner.