Amann Girrbach ceramill therm s Manual Del Usuario página 71

Function
Einstellungen (Settings)
Einheiten (Units)
Sprache (Language)
Datum/Uhrzeit Date/Time)
(
Bildschirmeinstellung
(Screen setting)
Netzwerk (Network)
Generalcode (General code)
Ofenkennung (Furnace ID)
Akustisches Signal (Acous-
tic signal)
Heizungseinstellungen
Heating settings)
(
Lifteinstellungen (Lift set-
tings)
Programme (Programmes)
Trocknen (Drying)
Checkprogramm (Check
programme)
Oxidation
Temperaturkalibrierung
(Temperature calibration)
Kommunikation (Communication)
Drucker (Printer)
Qualitätsmanagement
(Quality management)
Diagnosedaten (Diagnosis
data)
Login Daten (Login data)
Backup / Recovery
FTP Server Login
Tab. 4
Description
For selection of the temperature units.
For selection of the user interface language.
For setting the date and time in the furnace control system.
For setting of the time, after which the screensaver is activated without
an entry.
For adjustment of the furnace network settings.
For adjustment of the furnace access levels.
For entry of the furnace ID.
For setting the acoustic signal at programme end.
For definition of the maximum values for temperature rise rate and
power consumption.
Determines whether a hazard warning is displayed before the lift opens
while the firing chamber is hot.
Performs a programme run for drying the furnace.
Performs a programme to check the operability of the most important
assemblies.
Performs the oxidation programme.
Performs a temperature calibration and adjusts the CCF value (calibra-
tions factor).
Specifies a printer for the furnace.
Determines whether a QM protocol is displayed after the end of a pro-
gramme sequence.
Displays the diagnostic data that were created from the check pro-
gramme.
Defines the access rights to the furnace via the web interface.
Backup and recovery of the data of the furnace control system.
Defines the furnace access to a FTP server.
S E T U P M E N U
E N
71