S E T U P M E N U
_
QM information
play of the QM information after each com-
E N
pleted firing programme. A coloured button
indicates that this function is active.
▪ Not active: QM information is not displayed,
but logged.
▪ Active: After a completed firing programme,
the corresponding detailed firing information
are indicated on the display.
_
Löschen (Delete)
_
Alle löschen (Delete all)
_
QM-Info anzeigen (Display QM info)
selected QM file.
9.3.2 Backup / Recovery
For reasons of data security, we recom-
mend that you back up all data regularly.
▷ In the
Setup
▷ The window for backing up and recovering data
is displayed.
Fig. 19 Setup > Backup / Recovery
Buttons:
_
Backup Start
USB stick.
76
activates/deactivates the dis-
deletes the selected QM file.
deletes all QM files.
displays the
menu, tap on
Backup/Recovery
starts backing up the data on a
_
Online Backup
starts backing up the data via the
network connection (online).
_
Recovery Start
USB stick.
_
Software Update
furnace software.
_
ESC
closes the window and switches back to the
Setup
menu.
To back up data on a USB stick:
▷ Insert a USB stick with sufficient memory into a
USB port on the back side of the furnace.
Any existing data on the USB stick will be
deleted at the beginning of the backup.
▷ Tap on
Backup Start
All furnace data are written on the USB stick.
▷ Wait until an acknowledgement tone sounds.
It signals the completion of the backup process.
.
▷ Remove the USB stick.
The furnace data are backed up.
To recover data from a USB stick or perform a
software update:
▷ Insert a USB stick with data backup/software
update into a USB port on the back side of the
furnace.
▷ Tap on
Recovery Start
All furnace data will be restored and/or the soft-
ware is updated.
▷ Wait until an acknowledgement tone sounds.
It signals the completion of the process.
▷ Remove the USB stick.
All furnace data are restored and/or the soft-
ware is updated.
starts recovering the data on a
starts an online update of the
.
.