Amann Girrbach ceramill therm s Manual Del Usuario página 65

Information line [1]
The information line displays the programme
name.
The two sequence buttons
the information line scroll to the next respectively
the previous programme. Alternatively, you can
also swipe left or right across the screen for this.
Graphical indication [2]
The graphical indication shows the programme
sequence and contains the following elements:
_ Vertical axis: Indicates the temperature.
_ Horizontal axis: Indicates the time.
_ Cursor: Indicates the current position (time) in
the programme sequence.
_ Diagram: Displays the programme sequence as
a coloured curve. The chronological sequence
of the temperature with respect to the firing
object is represented. Time intervals in the
graphic are backed in colour.
_ <, >: The two sequence buttons aside of the
graphic move the cursor through the individual
programme steps.
Double-tapping in the graphical represen-
tation opens the programme editor in
order to change the firing parameters.
Command line [3]
The command line displays the individual pro-
gramme steps with the firing parameters in the
"CVTL" syntax. A tap on the command line opens
the programme editor for changing firing parame-
ters.
Tapping in the command line opens the
programme editor in order to actually
change the firing parameters.
< >
and left and right of
S C R E E N D I S P L A Y S
Toolbar [4]
The toolbar contains various buttons:
_
Speichern (Save)
saves/stores the programme.
_
Edit
opens the programme editor in order to
change the firing parameters.
_
GO TO GO TO Auswahl (GO TO selec-
opens the
tion)
window. In this window, a different pro-
gramme can be selected within the set.
Fig. 11 GO TO Auswahl (GO TO selection)
_
Bilder (Images)
opens a window for selection of
an image.
_
Start
starts the programme.
Start
After starting, the
replaced through the
_
Stop
prematurely ends a running programme.
The heating is switched off and the furnace
cools down. The firing run is not counted, mean-
ing, the firing number does not increase. After
Stop
stopping, the button is automatically
replaced through the
_
ESC
ends the programme indication and opens
the Programme Manager.
window
button is automatically
Stop
button.
Start button.
E N
65