Programmes - Amann Girrbach ceramill therm s Manual Del Usuario

S E T U P M E N U
▷ Tap once more on this set.
The word
E N
and indicates that all programmes in this set are
treated as fixed programmes.
▷ Tap once more on this set.
The symbol disappears. The programmes in
this set are no longer protected.
▷ Protect all desired sets in this manner.
▷ Tap on
OK
Setup
The
▷ Sets protected by the general code are marked
with a lock in the button in the Programme Man-
ager. In the programme indication, a lock in the
information bar indicates a protected pro-
gramme.
▷ To activate the general code:
▷ In the
Setup
ton.
The alphanumerical keyboard window is dis-
played.
▷ Enter the password for the general code.
The general code is deactivated.
To change protected sets:
▷ Deactivate the general code.
▷ Change programmes or add sets.
▷ Activate the general code and protect the sets
as desired.
9.2

Programmes

9.2.1 Drying
The drying programme is used for drying the fir-
ing chamber, for example when the furnace was
subject to high humidity for a prolonged period.
74
Fix
is displayed next to the
.
menu is displayed.
General code
menu, tap on the
▷ In the
Setup
symbol button.
The window for starting the drying programme
is displayed.
but-
Fig. 17 Setup > Drying
ESC
closes the window and switches back
to the
▷ Mount the firing table.
▷ Tap on
Start
Trocknen (Drying)
The
long as the programme is running (approx. 90
minutes).
The programme run can be cancelled at any time:
▷ Tap on the
A security prompt - if you really want to cancel
the programme - is displayed:
▪
OK
confirms the prompt and cancels the pro-
gramme.
▪
ESC
withdraws the decision and continues the
programme.
Trocknen (Drying)
menu, tap on the
Setup
menu.
.
window is displayed as
Stop
button.