Calling Up The Programme Editor; Cancelling The Programme Editor; Creating A New Programme - Amann Girrbach ceramill therm s Manual Del Usuario

8.2

Calling up the programme editor

▷ Select the desired firing programme in the Pro-
gramme Manager.
The programme indication is displayed.
▷ Tap on
Edit
.
A coloured button indicates that the pro-
gramme editor is active. Additionally, the
status is displayed in the information line.
▷ Tap on the command line below the programme
indication.
The keyboard window for classic editor is dis-
played
The entry of a new command line is expected by
default.
Commands are overwritten by default. To
enter new commands:
▷ Tap on
Insert
.
The command line shows the command sequence
in the order of its execution. Programming with
the CVTL commands being used requires practice
and understanding of the ceramics and firing
techniques.
8.3

Cancelling the programme editor

▷ Tap on
Speichern (Save)
changes.
▷ Tap on
Edit
.
The coloured button goes out and indicates that
the programme editor is inactive. The
tus is no longer displayed in the information
line.
8.4

Creating a new programme

To create a new programme:
▷ Open the Programme Manager.
▷ Tap on the desired storage area.
Edit
save/store the
Edit sta-
P R O G R A M M E E D I T O R
▷ Tap on the set where the new programme is to
be saved/stored.
▷ Tap on
Programme (Programmes)
The programme list is active now.
▷ Tap on
Neu (New)
.
Programmauswahl (Programme selection)
The
window opens.
Fig. 13 Programme selection
▷ Tap on
Classic
.
▷ Tap on the programme name.
The alphanumerical keyboard window opens.
▷ Enter a programme name.
▷ Tap on
OK
.
The programme editor is opened.
▷ Edit the new programme.
▷ Tap on
Speichern (Save)
▷ Tap on
ESC .
The programme editor is closed and the Pro-
gramme Manager is displayed.
The programme name can be changed
later at any time:
▷ In the Programme Editor, tap into the
field for the programme name.
The alphanumerical keyboard window
opens.
.
window
.
E N
69