Safety - Silca Tri-Code Manual De Uso

Operating manual - English
1.2 S
AFETY
• Protective shield
The transparent protective shield is designed to cover the working parts as fully as possible, making
them completely safe.
The shield (V) (fig. 4, page 6) must be raised in order to fit keys for cutting or carry out other operations.
Raising of the shield is controlled by a microswitch and disactivates the operating and movement
functions, including the cutter. A special message appears on the display to warn that the shield is not
closed. To re-start the work cycle, replace the shield in its original position and press the START button
on the machine keypad.
• Emergency stop
The red emergency button (P) (fig. 4, page 6), placed on the right-hand side of the machine is used to
stop it immediately in the event of faulty operation or danger for the operator.
When the cause of the emergency has been eliminated, turn the button clockwise 45° to disactivate it.
Note: the operator is responsible for keeping the area around the button clear so that it can be reached as quickly
as possible.
IMPORTANT: keys in anodized aluminium, plastic or any other material that has no electrical
conductivity CANNOT BE DECODED!
For keys of this type use only the "key-cutting" function.
Copyright Silca 2006
TRI-CODE H.S.
5