Regulation And Use Of The Machine; Keypad And Function Keys - Silca Tri-Code Manual De Uso

Operating manual - English
4

REGULATION AND USE OF THE MACHINE

4.1 K
EYPAD AND FUNCTION KEYS
The machine's keypad has 19 alphanumeric and 6 function keys.
The alphanumeric keys are used for entering the data card number and cutting data (numbers and/or
letters) according to the code on the card in use.
Each of the 19 alphanumeric keys contains two characters: the main character (white), which is directly
active, and an alternate character (red), which is activated by simultaneously pressing the SHIFT key.
E.g.
Held down
display
Fig. 11
F
UNCTION KEYS
[STOP]
Stop button, particularly when the machine is in motion.
Interrupts the function in progress at any time during operation.
[START]
Activates machine operations (with shield down).
[ENTER]
Confirms advancement of the various functions in the menu.
[CLEAR]
deletes characters.
+
To clear the axes enter the main menu and use the combination of keys [SHIFT] + [STOP].
[SHIFT]
Press the SHIFT key and hold down together with the double function keys in order to digit the
red letters.
• Regulating the display
It is possible to modify the angle of vision (illumination) on the machine's display by following the
instructions below.
• Press the arrow key [Down]
, simultaneously keeping the arrow keys both pressed [Up/Down]
desired visualization.
• Press the arrow keys [Up/Down]
key [Down]
reach the desired angle.
[1/H] key pressed directly produces: 1
[SHIFT] and pressed
SHIFT
function keys
The combination of the [SHIFT] + [CLEAR/COPY] keys allows automatic entry into
the 'Decode and copy' function from any of the menus.
to get a better view from below and then press the arrow key [Up]
, simultaneously keeping the arrow keys both pressed [Up/Down]
Copyright Silca 2006
[1/H] key produces: H
alphanumeric keys
to get a better view from above and then press the arrow
TRI-CODE H.S.
up until you reach the
up until you
13