Test; Test 2: Y Axis Motor (Bottom Carriage) - Silca Tri-Code Manual De Uso

Operating manual - English
5.7.2

TEST

There is a TEST menu on the machine, for use in the event of faulty operation or for checks.
Attention: this 'Test' chapter can be used to check any errors/anomalies that could occur on the machine (Ch.
7.1 "Trouble shooting", page 69).
Select the function from the main menu by placing the cursor on "4 - Maintenance"
Select "2 - Test".
Operational keys: arrow keys [Up/Down] to position the cursor on the option required, and press [Enter].
• Test 1: X AXIS MOTOR (top carriage)
Carefully follow the instructions on the display and check that the X axis carriage moves.
- With the arrow [Down] the carriage moves to the right.
- With arrow [Up] the carriage moves to the left.
Attention: during this test all the end of run controls are disabled; avoid moving the carriage up against its
mechanical stops.
Note: if the motor does not start, contact Silca's Technical Assistance Dept.
•

Test 2: Y AXIS MOTOR (bottom carriage)

Carefully follow the instructions on the display and check that the Y axis carriage moves.
- With the arrow [Down] the carriage moves towards the operator.
- With the arrow [Up] the carriage moves towards the cutter.
Attention: during this test all the end of run controls are disabled; avoid moving the carriage up against its
mechanical stops.
Note: if the motor does not start, contact Silca's Technical Assistance Dept.
• Test 3: CUTTER MOTOR
Carefully follow the instructions on the display and check that the cutter motor works.
Note: if the cutter motor does not turn, contact Silca's Technical Assistance Dept.
48
1 - X a x i s m o t o r
2 - Y a x i s m o t o r
3 - C u t t e r m o t o r
4 - X a x i s s e n s o r
5 - Y a x i s s e n s o r
6 - S h i e l d m i c r o
7 - E l e c t r i c c o n t a c t
8 - D i a l l o c k l e v e r
9 - K e y b o a r d
1 0 - D i s p l a y
1 1 - S e r i a l p o r t
1 2 - B a t t e r y s t a t u s
1 X A X I S M O T O R
P r e s s a r r o w e d k e y s
t o m o v e a x i s .
2 Y A X I S M O T O R
P r e s s a r r o w e d k e y s
t o m o v e a x i s .
3 C U T T E R M O T O R
S T A R T k e y t o
a c t i v a t e m o t o r .
Copyright Silca 2006
> >
TRI-CODE H.S.