Belt Replacement And Tension Adjustment - Silca Tri-Code Manual De Uso

Operating manual - English
7.2 B
ELT REPLACEMENT AND TENSION ADJUSTMENT
1) Turn off the machine and unplug.
2) open the top compartment (Ch. 7.6, page 75).
3) loosen (without removing) the grub screw (Y2) that secures the belt tightening pulley (fig. 54).
4 a) tightening:
- increase belt tension by means of the socket head screw (Y3), using the allen key provided.
4 b) replacement:
- loosen the belt by means of the socket head screw (Y3), using the allen key provided.
- remove the belt and replace it.
- tighten by means of the socket head screw (Y3) using the allen key provided.
5) lock the belt tightening pulley by tightening the socket head screw (Y2).
6) reposition the belt cover.
Y3
Fig. 54
Y2
Copyright Silca 2006
TRI-CODE H.S.
71