Use Of The Clamp - Silca Tri-Code Manual De Uso

Operating manual - English
4.2 U
SE OF THE CLAMP
The machine is provided with the standard clamp shown in fig. 12.
mobile
plates
Fig. 12
Stop 2
Stop 1
Stop 0
Fig. 13
As illustrated in fig. 12, the clamp has 3 fixed plates (A-left; B/C centre; right) and 1 mobile double plate.
Two of the fixed plates (A e B/C) plus the mobile double plate can be replaced when worn.
The clamp has 2 vertical cylindrical pins to detect/recognise the clamp by electric contact.
The A clamp comes with 3 Stops (0-1-2) for keys to be decoded or cut with jaw A.
The B clamp comes with 2 Stops (0-2) for keys to be decoded or cut with jaw B
The C clamp comes with 1 Stop (0) for keys to be decoded or cut with jaw C.
The clamp has 3 position notches (Z) so that it can be easily accommodated in the required position
(Clamp A, B or C).
When the (F1) handle is loosened by at least one turn and the anatomic grip (F2) is pulled towards the
front of the machine the clamp is released therefore can slide to the right or left.
When the (F2) anatomic grip is released and the clamp is manually moved, the positioning device will
lock the clamp into the first position notch it finds.
When the clamp is in the required position (jaw A, B or C) the (F1) handle should be tightened.
Fig. 14
14
A
Z
F2
F1
Copyright Silca 2006
B-C
F
TRI-CODE H.S.
Stop 0
F