Hologic FLUENT FLT-100 Manual Del Operador página 23

Connect the MyoSure Tissue Removal Device when required
Note:
MyoSure Tissue Removal Device setup may be performed at any stage of the procedure.
WARNING! Original Accessories
For your own safety and that of your patient, use only Fluent accessories. Tubing sets are single use disposables.
Following your facility's sterile protocol, perform the following steps:
1.
Connect the foot pedal.
2.
Connect the MyoSure drive cable to the connector on the front panel of the Fluent Fluid Management System.
3. Connect the suction tube of the MyoSure Tissue Removal Device to the tube on the Out-FloPak that has a green band adjacent to the barb
connector.
After connecting the Fluent Fluid Management System components, you are ready to prime the system as per Chapter 4: Priming the System.
English
Fluent Fluid Management System
Chapter 3: Connecting the System Components
21