Care & Cleaning - Sage the Fast Slow GO Guía Rápida

Care & Cleaning
Before cleaning, ensure the cooker is turned
off. Remove the power plug from the power
outlet and remove the connector end of the
power cord from the cooker base. Allow the
cooker and all accessories to cool completely
before disassembling and cleaning.
Wash removable cooking bowl with warm
soapy water and a clean soft cloth or sponge.
Rinse with clean water and dry thoroughly.
If limescale deposits develop over time,
combine 2 tablespoons of white vinegar
and 1 cup (250ml) hot water in the cooking
bowl and heat using the steam function for
10 minutes before cooling and cleaning with
a scrubbing brush.
NOTE
Removable cooking bowl can be washed
in dishwasher, but it is recommended to
wash cooking bowl in hot, soapy water using
a mild household detergent. Rinse and dry
thoroughly.
WARNING
• Do not use abrasive cleaners, steel wool
or scouring pads on the outer and inner
body of the appliance.
• Do not immerse metal base or power cord
in water or any other liquid as they may
cause electrocution.
• Ensure removable cooking bowl is
correctly positioned in the base before
you commence cooking.
DISASSEMBLE LID:
• Gently pull the silicone rubber gasket
out from under the gasket holder. Check
periodically that it is clean, flexible and not
cracked or torn. If damaged do not use
the appliance.
• Wash the inside of the lid with a wet, soapy
sponge or cloth. Use a brush to remove oil
residue if necessary. Wipe dry with a clean,
damp cloth.
• Regularly inspect that Pressure Release
Valve Cover is clean and free of liquid/food.
Remove pressure release valve cover from
the lid and wipe over with a soapy cloth
and dry clean. Rinse well and replace by
clipping back in place.
• Pressure Safety Valve will need to be
regularly checked and cleaned in order
to avoid any clogging which could result in
blocking the safety valve. Wash and clean
any oil or food residue. Ensure the valve
moves in and out smoothly after cleaning.
SILICONE RUBBER GASKET:
• Replace silicone rubber gasket every
1–2 years (see your nearest Sage Service
Centre).
• Wash gasket in warm, soapy water. Rinse
with clean water, dry thoroughly and place
back in their original position.
• The silicone rubber gasket can be washed
in the top rack of a dishwasher to eliminate
odour from spices.
• Soak the silicone rubber gasket in a mixture
of bicarbonate soda and water to help
eliminate odours before cleaning.
EN
23