Publicidad
Conveyor reassembly
Assemble RH side conveyor (B) driving it in position and moving
it forward and then backward, so that tab (B2) fits inside slot (X1)
and U-bolts (B3) inside retainers (X2).
Fasten LH side conveyor (B) by starting no. 2 screws (B1).
Tighten the no. 2 screws (B1) to the specified torque.
Repeat the same procedure to reassemble LH conveyor (C).
Reassemble the Hands free cover (A) by inserting the cover pins
(A2) inside the tank vibration dampers and press on tabs (A1) until
they engage in place.
42
Conveyor reassembly
Assemble RH side conveyor (B) driving it in position and moving
it forward and then backward, so that tab (B2) fits inside slot (X1)
and U-bolts (B3) inside retainers (X2).
Fasten LH side conveyor (B) by starting no. 2 screws (B1).
Tighten the no. 2 screws (B1) to the specified torque.
Repeat the same procedure to reassemble LH conveyor (C).
Reassemble the Hands free cover (A) by inserting the cover pins
(A2) inside the tank vibration dampers and press on tabs (A1) until
they engage in place.
ISTR 607 / 01
Publicidad
